Monday, August 1, 2011

Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 404)

When you try to install SCCM Client in ccmsetup.log file on local machine you are getting the following error:

Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 404)
A Fallback Status Point has not been specified.  Message with STATEID='308' will not be sent.


To resolve the issue WebDav on SCCM's IIS WebDav should be configured.
Here is the way how to configure Web DAV settings:
Change the settings as is shown on the picture, Click Apply and after click on WebDAV Authoring Rule.


Configure Authoring Rule as is shown on the picture and click OK.

If you have still the same issue then remove Management Point and install it again.

4 comments:

  1. Thank you so much for this post.
    I was fighting with client push all day and this guide helped me and it's working now.

    ReplyDelete
  2. Nice post. this works for me too. good to have people like you out there.

    ReplyDelete
  3. Hello This is Sandy, this article helped me a lot :) thanks a ton

    ReplyDelete
  4. Thank you so much !! I tried this along with this

    Website: https://social.technet.microsoft.com/Forums/en-US/248b8fca-c6f3-47a4-a76c-c45125296692/sccm-mp-setup-failing-on-windows-server-2008-r2?forum=configmgrgeneral

    and now its working !!

    ReplyDelete